Ihe ntụgharị ugboro ugboro SCK300

Nkọwa dị mkpirikpi:

● Ihe ngosi LCD nke China na Bekee, dị mfe iji wụnye na debug;

● Japanese obosara na nnukwu ihe owuwu, oke ngwaahịa buru ibu, enwere ike iji ya na oge ihu igwe ọkụ;

● na ọrụ nsochi ọsọ, nwere ike ịbụ ezigbo ngwa nke mmalite nke abụọ fan;

●nwere ike ime 220V,380V, ma ọ bụ 220/380 na voltaji ndị ọzọ;

● na obere sekit, grounding na ndị ọzọ nchebe:

●nwere ike ịgbakwunye kaadị nchịkwa nna ukwu / ohu, kaadị mgbasa ozi mgbasa ozi, kaadị PG;

● moto asynchronous, nhọrọ moto synchronous;

Zitere anyị email

Nkọwa ngwaahịa

njirimara ngwaahịa

Tl kacha ọhụrụ moto-control specific digital signal processors (DSP) nwere oge elekere ruru 150Hz ka anabatara.

A na-akwado moto asynchronous na magnet na-adịgide adịgide synchronous Motors njikwa, na ezi autotuning.A na-ahazi profaịlụ moto abụọ nwere onwe ha, na ngbanwe nke njikwa moto abụọ nwere ike mezuo site na ntọala paramita ma ọ bụ ntinye ọnụ.

ln V/Fcontrol ọnọdụ ziri ezi njikwa njikwa dị ugbu a na-ejide n'aka na ọ nweghị mmejọ nke na-eme ugbu a n'agbanyeghị draịva na-agba ọsọ na osooso / mbelata, ma ọ bụ ọnọdụ akpọchiri rotor, na-echebe nke ọma draịva.h vector akara mode, acurate torque mmachi njikwa na-ekwe nkwa ike ma ọ bụ na-agafeghị oke na-agbaso ihe ngwa chọrọ, na-echebe igwe nke ọma.

Na V / F kewapụrụ njikwa mode, mmepụta ugboro na cutput voltaji nwere ike ịtọ otu ft maka ngwa, dị ka mgbanwe ugboro ike isi mmalite, torque Motors, wdg.

Ụdị njikwa	Mmalite torque	Oke ọsọ	Ọsọ ọsọ acy	Nzaghachi Torque
V/F njikwa	0.5Hz180%	1:100	± 0.5%
Njikwa enweghị ihe mmetụta ọsọ ọsọ 1	0.5Hz 180%	1:100	± 0.2%	<10ms
Njikwa ihe mmetụta ọsọ ọsọ 2	0.25Hz 180%	1:200	± 0.2%	<10ms
njikwa ọsọ-senso	OHz 200%	1:1000	± 0.02%	<5ms

Ntinye ike

voltaji ntinye akwadoro	Ntinye ugbu a nwere ogo	Ugboro ugboro	Oke voltaji enwere ike ime
3-phase 380VAC/400VAC/415VAC 440VAC/460VAC/480VAC	LEE tebụl “Modeland teknuzu paramita nke SCK300 usoro'	50HZ/60Hz, ndidi ±5%	Mgbanwe voltaji na-esochi ±10%, mkpụmkpụ mgbanwe-15% ~ 10% ie.323V~528V Ọnụego ngbanwe voltaji: <3%,THD na-ezute ụkpụrụ nke IEC61800-2

Mbupute ike

moto dabara adaba	Enyere ugbu a	voltaji mmepụta	Ugboro mmepụta	Ikike ibu karịrị
Lee okpokoro "Model na teknuzu paramita nke SCK300ceriau.F	Lee okpokoro "Model paramita teknụzụ nke SCK300 usoro"	3-phase: 0-gosiri ntinye voltaji, njehie na-erughị ± 3%	0.00HZ-600Hz Mkpebi 0.01HZ	150% 1 nkeji: 180% 10s; 200% 0.5s. otu ugboro kwa 10min.

Njirimara njikwa

Ụkpụrụ njikwa	V/F njikwa	Ihe mmetụta ọsọ ọsọ obere njikwa 1	Soeed-ihe mmetụta obere njikwa 2	Njikwa ihe mmetụta ọsọ ọsọ njikwa ọnọdụ
Mmalite torque	0.5Hz180%	0.5Hz180%	0.25H180%	0Hz 200%
Oke ọsọ	1:100	1:100	1:200	1:100
izi ezi ọsọ	± 0.5%	± 0.2%	± 0.2%	± 0.02%
Ọsọ ọsọ	-	± 0.3%	± 0.3%	± 0.1%
njikwa Torque	NO	NO	Ee	ee
Torque ziri ezi	-	-	± 7.5%	±5%
Nzaghachi Torque	-	<10ms	<10ms	<.5ms
Ndokwa izi ezi	-	-	-	± 1 Ahịrị usu ± 1

Ọrụ ndị bụ isi

Malite ugboro ugboro	0.00Hz-600.00Hz
Oge Acel/Decel	0.00s-3600s
Okike ebu	1.0KHz ~ 15.0KHz
Iwu Freguency mod	Ntọala dijitalụ +Kpad Elu/ala: Ntọala dijitalụ+ ọnụ elu/ala. Ntọala nkwukọrịta.Nhazi ihe atụ: Niile/AI2/AB.Ntọhapụ usu.
mmalite ụzọ	Malite site na mmalite ugboro ole.DC injection breeki na mmalite;Mmalite ofufe.
Ụzọ nkwụsị	Ramp ịkwụsị.Coast ịkwụsị.Ịgba breeki DC na nkwụsị ramp.
Ike breeki na-agbanwe agbanwe	Igwe breeki kpalitere voltaji: 650-750V.Oge ọrụ: 0.0-100.0s.Ngalaba breeki nke SCK300G3-037 na n'okpuru areopti naanị arụnyere ya.
Ike breeki DC	DC breeki mmalite ugboro: 0.00-600.00Hz.DC breeki ugbu a: mmalite torque 0.0 ~ 100%.DC oge braking: 0.0-100s.
Ọnụ ntinye	Ọnụ ntinye ntinye ngbanwe asatọ, otu ọnụ ntinye ntinye ọsọ dị elu.Nkwado ọnụ akọrọ, PIP na-arụ ọrụ, ọnọdụ ntinye NP; Ọnụ ntinye ntinye analog abụọ, otu n'ime ha enwere ike iji naanị ntinye voltaji ma nke ọzọ bụ nhọrọ.
mmepụta ọnụ	Otu mmepụta pulse dị elu (0-50kHZ square ebili mmiri na mmepụta analog abụọ (voltaji/programmable ugbu a)nwere ike wepụta akara dị ka ugboro iwu, ugboro mmepụta, wdg otu mmepụta dijitalụ. Mpụta ọsọ ọsọ abụọ.
Ọnụ ntinye ercode	Na-akwado ọkwa voltaji 5V/12V.Kwado OC push-pull.mgbaàmà dị iche ntinye na ndị dị otú ahụ.

gburugburu

Ubi	Elu	Okpomọkụ	iru mmiri	Mmaji	Nchekwa okpomọkụ
N'ọnụ ụzọ, enweghị ìhè anyanwụ kpọmkwem, uzuzu freeform, corrosive gases.ọkụ na-ere ọkụ. alụlụ mmanụ,watervapo-, mmiri ihe ubi, nnu, wdg.	0m-2000m: de-ọnụego 1% maka 100m ọ bụla mgbe karịa 1000 mita.	-10C-+40 ℃ 40 ℃ ~ 50℃ kwadoro mmepụta nke ugbu a de- Ọnụ ego 1% maka 1 ℃ ọ bụla.	5%-95% enweghị nkwenye echiche.	Obere karịa 5.9rrls2 (0.6g)	-40 ℃ - + 70 ℃

Nkọwa nke ọrụ ọnụ njikwa SCK300

Otu	Ntinye Analog
Ọnụ	Nhọpụta njedebe	Nkọwapụta
+ 10V	Ntinye Analog voltaji ntụaka	Voltaji: 10.3V± 3% Ihe nrụpụta kachasị ugbu a: 25mA.ad nguzogide nke mpụta potentiometer kwesịrị ịbụ karịrị 4000
GND	Analog ala	Kewapụrụ na COM ime ly
AI2	Ntinye log Ana 2	The voltaji na ugbu a nwere ike ịbụ 0-10V / 0-20mA, nke nwere ike ịgbanwe site ụzọ mgba ọkụ J4. Ntinye ntinye: ntinye voltaji bụ 20kΩ, ntinye ugbu a bụ 500kQ Mkpebi: Mgbe 10V kwekọrọ na 50Hz, mkpebi kacha nta bụ 5mV Njehie ±1%,25°C
A13	Ntinye log Ana 3	-10V ~ 10V voltaji Ntinye ntinye: 20kO na ntinye voltaji Mkpebi: Mgbe 10V kwekọrọ na 50Hz.kacha nta mkpebi bụ 5mV Njehie ±1%,25°C

Otu	Ntinye Analog
Ọnụ	Nhọpụta njedebe	Nkọwapụta
AO1	Analog mmepụta 1	0mA-20mA;impedance200-500Ω.0-10V: impedance>10kΩ2. 0mA-20mA;ntinye impedance 500Q, ntinye kacha ugbu a 25mA. Gbanwee J1 na akara osisi maka jumping n'etiti 0 ~ 20mAand0 ~ 10V. Factory ndabara: 0-10V.
AO2	Analog mmepụta 2	0mA ~ 20mA: impedance200 ~ 500Ω.0 ~ 10V: impedance>10kΩ. 0mA-20mA; impedance ntinye 50002. kacha ntinye ugbu a 25mA. Gbanwee J2 na bọọdụ njikwa maka ịwụ elu n'etiti 0-20mA na 0-10V.Ụlọ ọrụ ndabara 0-10V.
CND	Analog ala	sitere na COM Interior ly

Nkọwa nke ọrụ ọnụ njikwa SCK300

Otu	Ọnụ	Nhọpụta njedebe	Nkọwapụta
Dijitalụ mmepụta	DO1	meghere mkpoko ngwa ngwa	Oke voltaji: 0-24V	Oke dị ugbu a: 0-50mA
Dijitalụ mmepụta	HDO	meghee onye na-achịkọta ihe / Pupụ	Mepee mmepụta mkpokọta: dị ka DO1	Pulse mmepụta: 0 ~ 50KHz
Mbupute mbugharị	RO1A/RO1B/RO1C RO2A/RO2B/RO2C	Nsonaazụ relay abụọ	RO1A njedebe.RO1B na-emechi emechi.RO1C na-emeghekarị RO2A nkịtị njedebe.RO2B na-emechi emechi.RO2C na-agbanye mgbe niile	Ikike kọntaktị: 250VAG3A.30VDC1A.

Otu	Ntinye Analog
Ọnụ	Nhọpụta njedebe	Nkọwapụta
+ 24V	+ 24V	24V± 10%, dịpụrụ adịpụ na GFNID inter iorly Ibu kacha 200mA
PLC	Ọnụ ọnụ ntinye dijitalụ	Gbanwee n'etiti ọkwa dị elu na ọkwa dị ala. Obere-ekesa na ± 24V na nnyefe. uru dị ala nke irput dijitalụ bara uru, ntinye ike mpụga.
COM	+ 24V ala	Kewapụrụ na GNID n'ime ime
S1-S8	Ọnụ ọnụ ntinye dijitalụ1-8	Ntinye:24VDC.5mA Ugboro ugboro: 0-200Hz Oke voltaji: 10-30V
HDI	Ntinye dijitalụ/Ntinye Pulse	Oke voltaji: 10-30V Ntinye dijitalụ: dị ka S1-S8 Ntinye Pulse: 0.1 ~ 50kHz;

Nkeji gory	Terminal 485 interface	Ahụigodo 485 interface
Ọnụ	Nhọpụta njedebe	Nkọwapụta
485+	Mgbama dị iche iche 485+	Ọnụego: 1200/2400/4800/9600/19200/38400/57600bps Ogologo kacha elu: 500m (jiri eriri netwọk ọkọlọtọ)
485-	Mgbama dị iche iche 485-
GND	485 nkwukọrịta ala kpuchie	sitere na COM inter iorly

SCK300-ining eserese nke 380V otu-fase AC mbanye

N'ozuzu na nwụnye akụkụ

Nlereanya	SCK300 usoro ọdịdị na nrụnye akụkụ (mm) ndepụta na arịọnụ akụkụ
	W	WI	H	H1	D	D1	Φ
SCK300 G3-0D75	108	96	134	118	149	140	5
SCK300 G3-1D5
SCK300 G3-2D2
SCK300G3-004
SCK300 G3-5D5/P3-7D5	180	167	240	228	214	205	5.5
SCK300G3-7D5/P3-011
SCK300 G3-011/P3-015
SCK300G3-015/P3-018	225	200	354	330	211	205	6
SCK300G3-018/P3-022
SCK300G3-022/P3-030
SCK300G3-030/P3-037	240	165	450	433	236	230	7
SCK300 G3-037/P3-045
SCK300 G3-045/P3-055	240	160	560	545	331	321	7
SCK300 G3-055/P3-075
SCK300G3-075/P3-090	270	195	640	617	378	368	10
SCK300G3-090/P3-110
SCK300 G3-110/P3-132
SCK300G3-132/P3-160	352	220	800	777	418	408	10
SCK300 G3-160/P3-185
SCK300G3-185/P3-200	360	200	940	912	494.5	484.5	17.5
SCK300G3-200/P3-220
SCK300G3-220/P3-250
SCK300G3-250/P3-280	370	200	1140	1112	575.5	565.5	17.5
SCK300G3-280/P3-315
SCK300 G3-315/P3-350	400	240	1250	1222	560	550	17.5
SCK300G3-350/P3-400
SCK300 G3-400/P3-450